SBR cloth printing
SBR with a cloth imprint on one side of the material for effective bonding or limited non-slip applications.
| ISO Name | SBR Styreen-Butadieen Rubber |
| Color | Black |
| Temperature range | -10 and 70 °C |
| Specific gravity | 1460 kg/m3 |
| Hardness | 70 Shore A (± 5) |
| Elongation at break | 200 % |
| Tensile strength | 4 N/mm2 |
Material properties
SBR with a cloth imprint on one side of the material for effective bonding or limited non-slip applications.
Material applications
Seals and underlay strips for shipbuilding and general industry.
| Gasoline | Oil | UV | Water | Drinkable water | Wear-resistant | Acids | Logen | Base |
|---|---|---|---|---|---|---|---|---|
| Non-resistant | Non-resistant | Non-resistant | Non-resistant | Non-resistant | Non-resistant | Non-resistant | Non-resistant | Non-resistant |
Dimensions
| Item Code | Item Name | Length | Width |
|---|---|---|---|
| 20501015 | SBR doekafdruk met inlage 1,5+1 mm | ||
| 20501020 | SBR doekafdruk met inlage 2+1 mm | 20.000 | 1.400 |
| 20501030 | SBR doekafdruk met inlage 3+1 mm | 10.000 | 1.400 |
| 20501040 | SBR doekafdruk met inlage 4+1 mm | 10.000 | 1.400 |
| 20501050 | SBR doekafdruk met inlage 5+1 mm | 10.000 | 1.400 |
| 20502030 | SBR doekafdruk met inlage 3+2 mm | ||
| 20502040 | SBR doekafdruk met inlage 4+2 mm | ||
| 20502050 | SBR doekafdruk met inlage 5+2 mm | ||
| 20502060 | SBR doekafdruk met inlage 6+2 mm | ||
| 20502080 | SBR doekafdruk met inlage 8+2 mm |
Compression set
The compression set is the permanent deformation of the material at the temperature and time specified below.| Testing Regulation | Duration | Temperature | Difference |
|---|---|---|---|
| ISO 815 | 22 hour(s) | 70 °C | 50 % |
We provide the product information as known to us with the utmost care. However, we do not accept any liability for any inaccuracies and/or incompleteness. For high-impact applications, we always recommend having the properties specific to that situation verified by us.
