EPDM
Particularly good ozone, aging and weather resistance. Suitable for water, air, acids and bases. Ideal in for use for indoor and outdoor swimming pools.
| ISO Name | EPDM |
| Color | Black |
| Temperature range | -40 and 120 °C |
| Specific gravity | 1220 kg/m3 |
| Hardness | 70 Shore A (± 5) |
| Elongation at break | 200 % |
| Tensile strength | 9 N/mm2 |
Material properties
Particularly good ozone, aging and weather resistance. Suitable for water, air, acids and bases. Ideal in for use for indoor and outdoor swimming pools.
Material applications
Profile rubber, seals for air conditioning systems, automotive industry (various automotive approvals such as VW 2.8.1 G70) and chemistry.EPDM has been tested for ozone resistance for 48 hours under 40 degrees with 200 pp hm. The result has been a crack level of 0.
| Gasoline | Oil | UV | Water | Wear-resistant | Acids | Base |
|---|---|---|---|---|---|---|
| Non-resistant | Non-resistant | Good | Excellent | Low | Good | Excellent |
Dimensions
| Item Code | Item Name | Length | Width |
|---|---|---|---|
| 11100005 | EPDM 0,5 mm | 20.000 | 1.400 |
| 11100010 | EPDM 1 mm | 20.000 | 1.400 |
| 11100015 | EPDM 1,5 mm | 20.000 | 1.400 |
| 11100020 | EPDM 2 mm | 20.000 | 1.400 |
| 11100030 | EPDM 3 mm | 10.000 | 1.400 |
| 11100040 | EPDM 4 mm | 10.000 | 1.400 |
| 11100050 | EPDM 5 mm | 10.000 | 1.400 |
| 11100060 | EPDM 6 mm | 10.000 | 1.400 |
| 11100080 | EPDM 8 mm | 10.000 | 1.400 |
| 11100100 | EPDM 10 mm | 5.000 | 1.400 |
| 11100120 | EPDM 12 mm | 5.000 | 1.400 |
| 11100150 | EPDM 15 mm | 5.000 | 1.400 |
| 11100200 | EPDM 20 mm | 5.000 | 1.400 |
| 11100300 | EPDM 30 mm |
Compression set
The compression set is the permanent deformation of the material at the temperature and time specified below.| Testing Regulation | Duration | Temperature | Difference |
|---|---|---|---|
| ISO 815 | 22 hour(s) | 100 °C | 25 % |
Ageing
The accelerated aging tests represent the decline in product properties under the conditions listed below.| Testing Regulation | Ageing conditions | Ageing hardness | Ageing strength | Elongation |
|---|---|---|---|---|
| DIN 53508 | 70 hour(s) 125 °C | 5 | -10 % | -20 % |
We provide the product information as known to us with the utmost care. However, we do not accept any liability for any inaccuracies and/or incompleteness. For high-impact applications, we always recommend having the properties specific to that situation verified by us.
