SBR
General and universal premium rubber for many applications with applications without severe requirements.
| ISO Name | SBR Styreen-Butadieen Rubber |
| Color | Black |
| Temperature range | -10 and 70 °C |
| Specific gravity | 1460 kg/m3 |
| Hardness | 70 Shore A (± 7) |
| Elongation at break | 200 % |
| Tensile strength | 4 N/mm2 |
Material properties
General and universal premium rubber for many applications with applications without severe requirements.
Material applications
Seals and underlay strips for shipbuilding and general industry.
| Gasoline | Oil | UV | Water | Drinkable water | Wear-resistant | Acids | Logen | Base |
|---|---|---|---|---|---|---|---|---|
| Non-resistant | Non-resistant | Non-resistant | Average | Non-resistant | Non-resistant | Average | Low | Low |
Dimensions
| Item Code | Item Name | Length | Width |
|---|---|---|---|
| 20000010 | SBR 1 mm | 20.000 | 1.400 |
| 20000015 | SBR 1,5 mm | 20.000 | 1.400 |
| 20000020 | SBR 2 mm | 10.000 | 1.400 |
| 20000030 | SBR 3 mm | 10.000 | 1.400 |
| 20000040 | SBR 4 mm | 10.000 | 1.400 |
| 20000050 | SBR 5 mm | 10.000 | 1.400 |
| 20000060 | SBR 6 mm | 10.000 | 1.400 |
| 20000080 | SBR 8 mm | 5.000 | 1.400 |
| 20000100 | SBR 10 mm | 5.000 | 1.400 |
| 20000120 | SBR 12 mm | 5.000 | 1.400 |
| 20000150 | SBR 15 mm | 5.000 | 1.400 |
| 20000200 | SBR 20 mm | 5.000 | 1.400 |
| 20000250 | SBR 25 mm | 5.000 | 1.400 |
| 20000300 | SBR 30 mm | 5.000 | 1.400 |
| 20000400 | SBR 40 mm | ||
| 20000500 | SBR 50 mm | ||
| 20000600 | SBR 60 mm | ||
| 20000800 | SBR 80 mm | ||
| 20001000 | SBR 100 mm | ||
| 20001015 | SBR met inlage 1,5+1 mm | 20.000 | 1.400 |
| 20001020 | SBR met inlage 2+1 mm | 20.000 | 1.400 |
| 20001030 | SBR met inlage 3+1 mm | 10.000 | 1.400 |
| 20001040 | SBR met inlage 4+1 mm | 10.000 | 1.400 |
| 20001050 | SBR met inlage 5+1 mm | 10.000 | 1.400 |
| 20001060 | SBR met inlage 6+1 mm | 10.000 | 1.400 |
| 20002030 | SBR met inlage 3+2 mm | 10.000 | 1.400 |
| 20002040 | SBR met inlage 4+2 mm | 10.000 | 1.400 |
| 20002050 | SBR met inlage 5+2 mm | 10.000 | 1.400 |
| 20002060 | SBR met inlage 6+2 mm | 10.000 | 1.400 |
| 20002080 | SBR met inlage 8+2mm | 10.000 | 1.400 |
| 20002100 | SBR met inlage 10+2 mm | 5.000 | 1.400 |
| 20002120 | SBR met inlage 12+2 mm | 5.000 | 1.400 |
| 20002150 | SBR met inlage 15+2 mm | 5.000 | 1.400 |
Compression set
The compression set is the permanent deformation of the material at the temperature and time specified below.| Testing Regulation | Duration | Temperature | Difference |
|---|---|---|---|
| ISO 815 | 22 hour(s) | 70 °C | 50 % |
We provide the product information as known to us with the utmost care. However, we do not accept any liability for any inaccuracies and/or incompleteness. For high-impact applications, we always recommend having the properties specific to that situation verified by us.
