NBR Nitrile

Good resistance to oil and gases, hydrocarbons, hydraulic fluids and various chemicals

ISO Name	NBR
Color	Black
Shape	Rolls
Temperature range	-10 and 70 °C
Specific gravity	1450 kg/m3
Hardness	65 Shore A (± 5)
Elongation at break	250 %
Tensile strength	7 N/mm2

Material properties

Good resistance to oil and gases, hydrocarbons, hydraulic fluids and various chemicals

Material applications

Seals for automotive, petrochemical and chemical industries

Gasoline	Oil	UV	Water	Wear-resistant	Acids	Logen	Base
Non-resistant	Good	Non-resistant	Average	Non-resistant	Low	Low	Low

Dimensions

Item Code	Item Name	Length	Width
10900005	NBR Nitril 0,5 mm	20.000	1.400
10900010	NBR Nitril 1 mm	20.000	1.400
10900015	NBR Nitril 1,5 mm	20.000	1.400
10900020	NBR Nitril 2 mm	20.000	1.400
10900030	NBR Nitril 3 mm	10.000	1.400
10900040	NBR Nitril 4 mm	10.000	1.400
10900050	NBR Nitril 5 mm	10.000	1.400
10900060	NBR Nitril 6 mm	10.000	1.400
10900080	NBR Nitril 8 mm	5.000	1.400
10900100	NBR Nitril 10 mm	5.000	1.400
10900120	NBR Nitril 12 mm	5.000	1.400
10900150	NBR Nitril 15 mm	5.000	1.400
10900200	NBR Nitril 20 mm	5.000	1.400
10900300	NBR Nitril 30 mm	5.000	1.400
10901015	NBR Nitril met inlage 1,5+1 mm	20.000	1.400
10901020	NBR Nitril met inlage 2+1 mm	20.000	1.400
10901030	NBR Nitril met inlage 3+1 mm	20.000	1.400
10901040	NBR Nitril met inlage 4+1 mm	10.000	1.400
10902030	NBR Nitril met inlage 3+2 mm	10.000	1.400
10902040	NBR Nitril met inlage 4+2 mm	10.000	1.400
10902050	NBR Nitril met inlage 5+2 mm	10.000	1.400
10902060	NBR Nitril met inlage 6+2 mm	10.000	1.400
10902080	NBR Nitril met inlage 8+2 mm	5.000	1.400
10902100	NBR Nitril met inlage 10+2 mm	5.000	1.400

Compression set

The compression set is the permanent deformation of the material at the temperature and time specified below.

Testing Regulation	Duration	Temperature	Difference
ISO 815	22 hour(s)	70 °C	40 %

Ageing

The accelerated aging tests represent the decline in product properties under the conditions listed below.

Testing Regulation	Ageing conditions	Ageing hardness	Ageing strength	Elongation
DIN 53508	70 hour(s) 70 °C	7	-10 %	-20 %

We provide the product information as known to us with the utmost care. However, we do not accept any liability for any inaccuracies and/or incompleteness. For high-impact applications, we always recommend having the properties specific to that situation verified by us.