NBR Nitrile
Good resistance to oil and gases, hydrocarbons, hydraulic fluids and various chemicals
| ISO Name | NBR |
| Color | Black |
| Temperature range | -10 and 70 °C |
| Specific gravity | 1450 kg/m3 |
| Hardness | 65 Shore A (± 5) |
| Elongation at break | 250 % |
| Tensile strength | 7 N/mm2 |
Material properties
Good resistance to oil and gases, hydrocarbons, hydraulic fluids and various chemicals
Material applications
Seals for automotive, petrochemical and chemical industries
| Gasoline | Oil | UV | Water | Wear-resistant | Acids | Logen | Base |
|---|---|---|---|---|---|---|---|
| Non-resistant | Good | Non-resistant | Average | Non-resistant | Low | Low | Low |
Dimensions
| Item Code | Item Name | Length | Width |
|---|---|---|---|
| 10900005 | NBR Nitril 0,5 mm | 20.000 | 1.400 |
| 10900010 | NBR Nitril 1 mm | 20.000 | 1.400 |
| 10900015 | NBR Nitril 1,5 mm | 20.000 | 1.400 |
| 10900020 | NBR Nitril 2 mm | 20.000 | 1.400 |
| 10900030 | NBR Nitril 3 mm | 10.000 | 1.400 |
| 10900040 | NBR Nitril 4 mm | 10.000 | 1.400 |
| 10900050 | NBR Nitril 5 mm | 10.000 | 1.400 |
| 10900060 | NBR Nitril 6 mm | 10.000 | 1.400 |
| 10900080 | NBR Nitril 8 mm | 5.000 | 1.400 |
| 10900100 | NBR Nitril 10 mm | 5.000 | 1.400 |
| 10900120 | NBR Nitril 12 mm | 5.000 | 1.400 |
| 10900150 | NBR Nitril 15 mm | 5.000 | 1.400 |
| 10900200 | NBR Nitril 20 mm | 5.000 | 1.400 |
| 10900300 | NBR Nitril 30 mm | 5.000 | 1.400 |
| 10901015 | NBR Nitril met inlage 1,5+1 mm | 20.000 | 1.400 |
| 10901020 | NBR Nitril met inlage 2+1 mm | 20.000 | 1.400 |
| 10901030 | NBR Nitril met inlage 3+1 mm | 20.000 | 1.400 |
| 10901040 | NBR Nitril met inlage 4+1 mm | 10.000 | 1.400 |
| 10902030 | NBR Nitril met inlage 3+2 mm | 10.000 | 1.400 |
| 10902040 | NBR Nitril met inlage 4+2 mm | 10.000 | 1.400 |
| 10902050 | NBR Nitril met inlage 5+2 mm | 10.000 | 1.400 |
| 10902060 | NBR Nitril met inlage 6+2 mm | 10.000 | 1.400 |
| 10902080 | NBR Nitril met inlage 8+2 mm | 5.000 | 1.400 |
| 10902100 | NBR Nitril met inlage 10+2 mm | 5.000 | 1.400 |
Compression set
The compression set is the permanent deformation of the material at the temperature and time specified below.| Testing Regulation | Duration | Temperature | Difference |
|---|---|---|---|
| ISO 815 | 22 hour(s) | 70 °C | 40 % |
Ageing
The accelerated aging tests represent the decline in product properties under the conditions listed below.| Testing Regulation | Ageing conditions | Ageing hardness | Ageing strength | Elongation |
|---|---|---|---|---|
| DIN 53508 | 70 hour(s) 70 °C | 7 | -10 % | -20 % |
We provide the product information as known to us with the utmost care. However, we do not accept any liability for any inaccuracies and/or incompleteness. For high-impact applications, we always recommend having the properties specific to that situation verified by us.
